About Us
LAS Drifters are a group of 1/10 rc ep car enthusiasts who enjoy the hobby via the drifting route .
ALL are welcome to join
Power points , carparks , coffeeshop and toilets available.
Time - Tues / Thurs 730pm till 1130pm
Please note : come back regularly for timing updates as time and days might vary.Wednesday, December 31, 2008
Sengkang DM on today
kenny's DM will be on today from morning till 1am ( i heard from seng)
cya guys later if ur going .
1am timing not accurate , so dun appear at 12mn wanting to play aftercountdown.
for 1st timers , SK dm got "cover charge" of $1 per DM.
Tuesday, December 30, 2008
DM on tues 30/12/2008
There will be be a Dm tonite.
timing shld be as usual or slighty later .
thanks
Friday, December 26, 2008
DM on SAT 27/12/2008
DM is on tml SAT
27/12/2008 @ 2pm till evening only.
come early to avoid disappointment
mesh any1?
my new toy...
Monday, December 22, 2008
DM tonite MON 22/12/2008
for those who had not played or played not enough during the weekends,
there will be a DM tonite at 730pm.
Monday, December 15, 2008
Tuesday, December 9, 2008
LAS drifters in the news
here it is
guys,
you all think the article will help on getting RC approval?
DM on THURS 11/12/2008
please do not come late to avoid disappointment.
playing time shorten due to complaints from residents and to prevent nagging from men in blue .
sorry , this is to prolong lifespan of LAS DM in the long run , or at least till RC approved.
PS : anyone staying in LOR AH SOO? need help for application of hobby club to RC..
PSS: i need 2 turnbuckles , anyone has spare to sell me?
thanks
Saturday, December 6, 2008
Monday, December 1, 2008
TUES 02/12/2008 LAS DM
good news , coffeeshop renovation should be ready by tml
drinks and toilet as well.
PS : for those that collected decals , try to do up shell asap so can take group photo for blog header pic . Still awaiting for cam man to do up more vids.....
BTW will be visiting either Taising or BK tml , those who wana go drop me a line
G
Friday, November 28, 2008
NO DM TONIGHT 28/11/2008
there will be no DM tonight.
IF there is any DM this coming weekend , will update later.
thanks
G
Team Decal Ready!
Thursday, November 27, 2008
Monday, November 24, 2008
Saturday, November 22, 2008
Thursday, November 20, 2008
Tuesday, November 18, 2008
Monday, November 17, 2008
lock a ball diff - reversible
Hi Guys ,
found this on DRC
credited to JT of DRCcentral
Here's an easy ball diff > Locked diff method I've devised, without over tightening the diff screw.
Pop down your local bike shop and buy a couple of tyre repair patches, the thin, plain rubber sort.
Take the ball diff apart and lay the pressure rings on the patches and draw around the rings, then cut out the circular patches. Now lay the rings on the pressure hubs (the two plastic / cast metal hubs that the plates sit against) and mark the inner circle (the centre hole) and cut that out of the now circular patches.
This exploded view is a modified version of the T2 ball diff from the X-Ray manual. Ball diff designs vary but this modification can be applied to all types.
Now simply rebuild the ball diff exactly as you normally would but leave out the larger diff balls placing the patches between the plastic ball holder and the pressure plates. Build the rest of the diff, including the smaller balls that surround the long screw, as normal. The very thin rubber patches give you the correct overall diff length and stop the diff operating without damaging any parts. There's no need to overtighten.
The result is a fully locked (spool) that can easily be returned to a ball diff.
DIY Brake lights
again , wonderful info as usual from DRCCENTRAL
credited to tvouthilak of DRC central
PS: can some1 good with electronics help me with it????
enjoy
*DISCLAIMER- I will not be held responsible for any damages made to the ESC, receiver, motor or any part of your car or yourself due to the making and using of this device.*
Parts:
-Red LEDs and LED holders
-Relay- I used a 5VDC SPDT micro relay from RadioShack #275-240
-Power source- I’m using (3) 1.5v button cells.
-Switch (if not included with power source). My power source has it’s own on/off switch.
-Wire
Tools:
-Wire cutter
-Soldering iron and solder
-Electrical tape
. Please refer to the diagram. Your relay may be set up differently depending on what relay you are using, but this should help you see how the parts go together.
This will not be a step by step tutorial, because the diagram is pretty much all you need. I will however try to explain how the diagram works.
Before we get started I would like to mention that the pins on my relay are very small so soldering was a bit tough. If you can find pin connecters small enough to fit on the pins, then go right ahead and use connecters. However, I think soldering makes for more of a secure connection.
Time to get started.
Pins 1 and 3 make a closed loop when no power (Car in STOP position) is sensed by the coil (pins 4 and 5). So wire the LEDs and the power source in series from pin 1 to pin 3.
Remember to wire in a switch between your power source and the LEDs if your power source doesn’t have a switch.
If wired correctly, the LEDs should turn on when you switch your power source on.
Ok, congratulate yourself if you’ve made it this far. Guess what, you’re half way done!
Now test if the relay is working. First solder some wires to the coil (pins 4 and 5) then grab your 7.2v battery pack (yes, the one that powers your car). Make sure your LEDs are on and touch the wires from the coil to the battery. You should hear a click (this is the sound of the relay switching from the “Closed” position to the “Open” position) and your LEDs should go off (car in GO position).
If successful, alls you have to do now is connect the wires from the coil (pins 4 and 5) to the output wires of your ESC going to the motor.
Now give it a try. Power up your car, turn the brake lights on and give her some gas. The lights should go off when you pull the throttle and come back on when you release the throttle.
Need pics
need your help ...
kindly send some pics of urself or your ride to gerald*lim*79 at gmail.com ( remove asterix)
so i can do up some galleries.
thanks
Sunday, November 16, 2008
Saturday, November 15, 2008
LAS going Pasir Ris DM
hi guys ,
as mentioned earlier , we will meeting up at pasir ris DM tomorrow 15/11/2008 @ 3pm
Please bring bash shell , pvc tires/ old t-drifts.
charge batts as duno powerpoints supplied anot , in case of rain will be at SK dm.
thanks